V1.1

What is needed:

• HTC Vive Focus 3
• TV, projector or monitor that supports Miracast (most smart TVs come standard with Miracast), if your device does not support Miracast you can buy a Miracast dongle. 
• Wi-Fi connection

How to screencast with a built-in Miracast receiver:

Important: If you can’t connect with your TV immediately, open the application on your TV as well for the Miracast to work.

1. Make sure both your HTC Vive Focus 3 headset and your Miracast device are connected to the same WiFi network.
2. Switch on your TV / receiver and open the Miracast application.
3. Put on your HTC Vive Focus 3, and press the VIVE button on your right controller. This will take you to the quick menu.
4. Select Cast from the quick menu. 
5. Select the device you want to cast to.

Your HTC Vive Focus 3 screen should now be duplicated to this device.

How to screencast with a Miracast dongle:

1. Make sure your Miracast dongle is connected to your TV.
   1. Select the HDMI channel the dongle is connected to on your TV.
2. Connect the HTC Vive Focus 3 to the WiFi signal of the Miracast dongle.
3. Put on your HTC Vive Focus 3, and press the VIVE button on your right controller. This will take you to the quick menu.
4. Select Cast from the quick menu. 
5. Select the device you want to cast to.
    

Your HTC Vive Focus 3 screen should now be duplicated to this device.

If have you any questions or still need assistance please contact: 

Email: [email protected] or Call PixoVR at (248) 996-8298 and Press option 3 for Tech Support.