Ladder Safety – Trainer Guide

Program Overview

The Ladder Safety module provides users with the ability to practice ladder safety in a safe virtual environment. They will receive a non-trade-oriented task, such as hanging a sign or changing a lightbulb and proceed to inspect the work area. Then, they will determine the type of ladder needed, inspect the ladder, and once they have an appropriate ladder, proceed to perform the task to completion.

While performing the task, users will also be assessed on their placement and if they are obeying rules such as reaching, leaning, and other common errors.

Core Learning Objectives

Area Survey — while not directly graded, users should survey the area to determine if hazards are present and the height of the ladder they will need
Ladder Selection — the ladder selected should be appropriate for the task
Ladder Inspection — users should inspect the ladder to determine if it is damaged and has appropriate markings to determine if it is acceptable for use
Ladder Setup — was the ladder used as intended, or was it leaned against a wall?
Ladder Use — did users climb hand over hand, stay within the confines of the rails, and stop 1-2 rungs from the top?

Tools

Laser Pointer — To interact with menus in the experience, use the laser pointer.
- To activate Ladder Placement Mode, activate the laser pointer first, and then press the Grip Button on controllers.
- When attempting to climb ladders or grip objects such as light bulbs, make sure to disable the laser pointer first.
Virtual Hands — To activate the green buttons, press them using virtual hands.

How to Get 100%

Scenario 1 — Change Light Bulb (low height)

Receive Work Assignment
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Platform or A-Frame
2. Press 8’ (platform ladder) or 6’ (a-frame ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again.
- Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Frayed or Cracked Fiberglass
5. Missing, Scratched or Painted Over Label
6. Bent, Broken or Missing Lock Arms
7. Dirty or Painted Ladder
8. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab a light bulb and place it in the bucket
Proceed to the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Replace Old Light Bulb

Scenario 2 — Change 2 Light Bulbs (low height)

Receive Work Assignments
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
Go to the Ladder Room
Select Ladder Specifications
1. Press Straight or Extension
2. Press 10’, 14’ (straight ladder) or 16’ (extension ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Missing or Bent Extension Lock
5. Frayed or Cracked Fiberglass
6. Missing, Scratched or Painted Over Label
7. Dirty or Painted Ladder
8. Broken Pull Rope
9. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab 2 light bulbs and place them in the bucket
Proceed to the Work Area
Set up Ladder
Perform First Task
1. Climb Ladder
2. Replace Old Light Bulb
3. Descend Ladder
Set up Ladder
Perform Second Task (repeat the first task)

Scenario 3 — Change 2 Light Bulbs (low height)

Receive Work Assignments
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Straight
2. Press 10’
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Frayed or Cracked Fiberglass
5. Missing, Scratched or Painted Over Label
6. Dirty or Painted Ladder
7. Broken Pull Rope
8. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab 2 light bulbs and place them in the bucket
Proceed to the Work Area
Set up Ladder
Perform First Task
1. Climb Ladder
2. Replace Old Light Bulb
3. Descend Ladder
Set up Ladder
Perform Second Task (repeat the first task)

Scenario 4 — Hang Sign

Receive Work Assignment
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Platform or A-Frame
2. Press 8’ (platform ladder) or 6’ (a-frame ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Frayed or Cracked Fiberglass
5. Missing, Scratched or Painted Over Label
6. Bent, Broken or Missing Lock Arms
7. Dirty or Painted Ladder
8. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab the sign and place it in the bucket
Proceed to the the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Hang Sign

Scenario 5 — Change Light Bulb (high height)

Receive Work Assignment
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Extension
2. Press 24’
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Missing or Bent Extension Lock
5. Frayed or Cracked Fiberglass
6. Missing, Scratched or Painted Over Label
7. Dirty or Painted Ladder
8. Broken Pull Rope
9. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab a light bulb and place it in the bucket
Proceed to the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Replace Old Light Bulb

Scenario 6 — Change 2 Light Bulbs (medium height)

Receive Work Assignments
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Straight or Extension
2. Press 14’ (straight ladder) or 20’ (extension ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Missing or Bent Extension Lock
5. Frayed or Cracked Fiberglass
6. Missing, Scratched or Painted Over Label
7. Dirty or Painted Ladder
8. Broken Pull Rope
9. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab 2 light bulbs and place them in the bucket
Proceed to the Work Area
Set up Ladder
Perform First Task
1. Climb Ladder
2. Replace Old Light Bulb
3. Descend Ladder
Set up Ladder
Perform Second Task (repeat the first task)

Scenario 7 — Change Light Bulb (medium height)

Receive Work Assignment
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Any Ladder Type
2. Press the Middle Height for Chosen Ladder
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Missing or Bent Extension Lock
5. Frayed or Cracked Fiberglass
6. Missing, Scratched or Painted Over Label
7. Bent, Broken or Missing Lock Arms
8. Dirty or Painted Ladder
9. Broken Pull Rope
10. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab a light bulb and place it in the bucket
Proceed to the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Replace Old Light Bulb

Scenario 8 — Deliver Supplies

Receive Work Assignments
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Extension
2. Press 20’
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Missing or Bent Extension Lock
5. Frayed or Cracked Fiberglass
6. Missing, Scratched or Painted Over Label
7. Dirty or Painted Ladder
8. Broken Pull Rope
9. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab the supplies and place them in the bucket
Proceed to the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Drop off Supplies

Scenario 9 — Deliver Supplies (two tasks)

Receive Work Assignments
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Straight or Extension
2. Press 16’ (straight ladder) or 20’ (extension ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Missing or Bent Extension Lock
5. Frayed or Cracked Fiberglass
6. Missing, Scratched or Painted Over Label
7. Dirty or Painted Ladder
8. Broken Pull Rope
9. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab the supplies and place them in the bucket
Proceed to the Work Area
Set up Ladder
Perform First Task
1. Climb Ladder
2. Drop off Supplies
3. Descend Ladder
Perform Second Task (repeat the first task)

Scenario 10 — Change Light Bulb (medium height)

Receive Work Assignment
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Platform or A-Frame
2. Press 12’ (platform ladder) or 10’ (a-frame ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Frayed or Cracked Fiberglass
5. Missing, Scratched or Painted Over Label
6. Bent, Broken or Missing Lock Arms
7. Dirty or Painted Ladder
8. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab a light bulb and place it in the bucket
Proceed to the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Replace Old Light Bulb

Scenario 11 — Change Light Bulb (medium height)

Receive Work Assignment
Inspect Work Area — Note any obstacles, hazards, or ladder height requirements
Remove Hazards. Possible Hazards:
1. Debris Pile
2. Construction Supplies
3. Hanging Wires
4. Floor Framing Studs
5. Doors
6. Water Puddles
7. Tools
8. Tarp
Go to the Ladder Room
Select Ladder Specifications
1. Press Platform or A-Frame
2. Press 12’ (platform ladder) or 10’ (a-frame ladder)
3. Press Spawn Ladders
Inspect Ladders for Defects — If all ladders have defects, spawn more by pressing Spawn Ladders again. Possible Defects:
1. Bent Frame
2. Bolted on Part
3. Missing or Broken Cleat
4. Frayed or Cracked Fiberglass
5. Missing, Scratched or Painted Over Label
6. Bent, Broken or Missing Lock Arms
7. Dirty or Painted Ladder
8. Bent or Missing Rung
Select an Appropriate Ladder
- Note: Once a ladder is selected for use, ladders cannot be spawned again. The task will fail if a faulty ladder is selected.
Collect Supplies for Task — Grab a light bulb and place it in the bucket
Proceed to the Work Area
Set up Ladder
Perform Task
1. Climb Ladder
2. Replace Old Light Bulb

Possible Inspection Failures

The following is a list of the different inspection failures that can be encountered. Note: Only a single ladder type is shown in each image, but the effect is similar or identical on other ladder material types if it can occur.

Ladder Error	Image Reference
Bent Frame Ladder Types: Any ladder type
Bolted on Part Ladder Types: Any ladder type
Cleat — Broken Ladder Types: Any ladder type
Cleat — Missing Ladder Types: Any ladder type
Extension Lock — Missing Ladder Types: Extension type
Extension Lock — Bent Ladder Types: Extension type
Label — Missing Ladder Types: Any ladder type
Label — Scratched Ladder Types: Any ladder type
Label — Painted Over Ladder Types: Any ladder type
Lock Arms — Bent Ladder Types: A Frame Platform
Lock Arms — Broken Ladder Types: A Frame Platform
Lock Arms — Missing Ladder Types: A Frame Platform
Oil and Dirt Ladder Types: Any ladder type
Paint Ladder Types: Any ladder type
Pull Rope — Broken Ladder Types: Extension
Rung — Bent Ladder Types: Any ladder type
Rung — Missing Ladder Types: Any ladder type
Fiberglass — Cracked Ladder Types: Any ladder type (fiberglass ladders only)
Fiberglass — Frayed Ladder Types: Any ladder type (fiberglass ladders only)

Ladder Labels

Below is an example of each type of label that will appear. Only the red Professional ladder label is correct.

For a more detailed walkthrough of the module, see the Ladder Safety User Guide.