First Aid – Trainer Guide

Program Overview

This first aid training module provides employees with a life-like experience to learn and practice basic first aid skills. Trainees will have to react to a co-worker’s injury, gather supplies, perform stabilizing first aid, contact emergency services, and properly follow up after the aid is complete. They have two chances to correctly complete the virtual reality scenario and earn their first aid certificate.

This will be a pass-fail course; if trainees make mistakes during the evaluation, they will be provided the opportunity to correct their errors and continue with the evaluation, however mistakes will be tracked and making enough errors along the way will cause the user to fail.

Core Learning Objectives

The main goal of this module is to assess the participant's ability to perform First Aid on both an electrical burn and a deep laceration.

Tools

Laser Pointer — To interact with menus and objects in this experience, aim the laser pointer at an interactable item and pull the controller trigger to select it.
Bandage Wrap — To wrap a bandage around a patient:
1. Select where the bandage starts (bottom of wound; wrap upwards)
2. Follow the targets while completing a steady, circular motion around the patient’s arm.

How to Get 100%

In this module, there are two scenarios: Electrical Burn and Laceration. The order in which these scenarios appear are in a randomized order.

Electrical Burn Scenario

In this scenario, users will need to provide first aid to your colleague in a warehouse. They will hear an accident occur in which their colleague is burned from an electrical cabinet and must approach them to help.

Approach patient.
Remove hazards.
- Possible Hazards — Electrical Wire, Cabinet Knob
- Select the electrical cabinet’s power switch to turn it off.
Select patient and proceed with asking questions to find out more information on their injury.
- Note: Users should ask all questions in order to get information about the incident.
Decide if the colleague needs medical attention or not. Select “Conscious and requires medical treatment”.
Dial emergency services using smartwatch (located on left wrist).
1. Tap Smartwatch
2. Select Phone Number: (depends on local region selected in lobby)
  - USA, Saudi Arabia — 911
  - Australia — 000 or 112
3. Select “Ambulance”
4. Select “Male”
5. Select “Middle Aged”
6. Select “Warehouse”
7. Select “Patient has Received a Burn”
8. Select “Trouble Breathing and Weak”
9. Emergency services are now on their way.
Gather supplies from the medical cabinet (select each item with laser pointer).
1. Select — Medical Gloves, Safety Glasses, Non-Stick Burn Dressing, Bandage Wrap and Blanket
After gathering medical supplies, equip PPE from the medical cabinet:
- Gloves — Touch box and pull a controller trigger to activate
- Glasses — Pick up glasses and place them near face
Select the patient.
1. Select “Have Patient Move to Sink”
2. Select Sink
3. Select “20 Minutes”
4. The patient will then walk over to the sink and run their arm under water.
Apply the wound dressing.
1. Grab the gauze dressing from the medical cabinet.
2. Apply the gauze dressing to the patient’s arm.
Wrap the bandage. Check the placard for further instructions.
1. Select where the bandage starts (bottom of wound; wrap upwards)
2. Follow the targets while completing a steady, circular motion around the patient’s arm.
Lastly, answer questions regarding next steps:
1. Waiting for emergency services — Select “Monitor vitals and reassure the patient”
2. When emergency services arrive — Select “Details of incident and patient” AND “Information on treatment performed”
3. Next priority — Select “Contact your manager and advise of the incident”
Experience ends.

Laceration Scenario

In this scenario, users will need to provide first aid to their colleague in a warehouse. They will hear an accident occur in which their colleague is cut from a saw.

Approach patient.
Remove hazards.
- Possible Hazards — Saw, Debris
- Tip: Remove the Saw first
Select the patient and proceed with asking them questions to find out more information on their injury.
- Note: Users should ask all questions in order to get information about the incident.
Decide if colleague needs medical attention or not. Select “Conscious and requires medical treatment”.
Dial emergency services from smartwatch (located on left wrist).
1. Tap Smartwatch
2. Select Phone Number: (depends on local region selected in lobby)
  - USA, Saudi Arabia — 911
  - Australia — 000 or 112
3. Select “Ambulance”
4. Select “Female”
5. Select “Middle Aged”
6. Select “Warehouse”
7. Select “Patient has Received a Deep Cut”
8. Select “Pale and Weak”
9. Emergency services are now on their way.
Gather supplies from the medical cabinet (select each item with laser pointer).
1. Select — Medical Gloves, Safety Glasses, Non-Stick Gauze, Bandage Wrap, and Blanket
After gathering medical supplies, equip the PPE from the medical cabinet:
- Gloves — Touch box and pull a controller trigger to activate
- Glasses — Pick up glasses and place them near face
Select the patient.
1. Select “Lie them Down”
2. The patient will then lie down.
Apply the wound dressing.
1. Grab the gauze dressing from the medical cabinet.
2. Apply the gauze dressing to the patient’s leg.
Wrap the bandage. Check the placard for further instructions.
1. Select where the bandage starts (bottom of wound; wrap upwards)
2. Follow the targets while completing a steady, circular motion around the patient’s leg.
Grab the blanket from the medical cabinet and place on the patient.
Lastly, answer questions regarding next steps:
1. Waiting for emergency services — Select “Monitor vitals and reassure the patient”
2. When emergency services arrive — Select “Details of incident and patient” AND “Information on treatment performed”
3. Next priority — Select “Contact your manager and advise of the incident”
Experience ends.

For a more detailed walkthrough of the module, see the First Aid User Guide.