V1.1

In this article, you will learn how to set up the boundary on a PICO headset.

How to Set a Boundary from Start Up

1. When turning on the headset, it should automatically ask to set up the boundary area.

2. Here you can choose between a Quick Setup or Custom.

   • Quick Setup — your playing area is circular and you can set it to 3 different sizes. You can also choose to play sitting or standing.

   • Custom — set your own floor height and draw your safe area.

3. Set the Floor Level:

   1. Look down at the virtual grid. If it appears to be at floor level, select "Continue".

   2. If not, select "Set Manually".

4. Create your Custom Boundary:

   1. Aim the controller pointer at the floor, then press and hold the Trigger to draw along the boundary of your cleared area.

   2. Select "Continue".

5. Once you are done with the setup, you can press "Start Play" to proceed. If you are not satisfied, click "Reset Play Area".

How to Set a New Boundary

1. From the home menu, select the time (located in the bottom menu bar) to open the Quick Settings menu.

2. Select the Boundary icon.

3. This will open the same menu that appears when turning on the device. Here you can choose between a "Quick Setup" or "Custom".

   • Quick Setup — your playing area is circular, and you can set it to 3 different sizes. You can also choose to play sitting or standing.

   • Custom — you can first set the height of the floor in your room using the Trigger button. After that you need to draw your playing area on the floor.

4. Set the Floor Level:

   1. Look down at the virtual grid. If it appears to be at floor level, select "Continue".

   2. If not, select "Set Manually".

5. Create your Custom Boundary:

   1. Aim the controller pointer at the floor, then press and hold the Trigger to draw along the boundary of your cleared area.

   2. Select "Continue".

Questions and Support

If you have any issues, please contact our tech support team at [email protected]